- 您现在的位置：买卖IC网 > Sheet目录370 > ZXSC300E5TA (Diodes Inc)IC LED DRVR WHITE BCKLGT SOT23-5
ZXSC300
APPLICATIONS INFORMATION
The following section is a design guide for optimum
converter performance.
Switching transistor selection
The choice of switching transistor has a major impact
on the converter e fficiency. F or optim um
performance, a bipolar transistor with low V CE(SAT) and
high gain is required.
Schottky diode selection
For the maximum efficiency a Schottky rectifier diode
is required not a normal silicon diode. As with the
switching transistor the Schottky rectifier diode has a
major impact on the converter efficiency. A Schottky
diode with a low forward voltage and fast recovery
time should be used for this application.
The diode should be selected so that the maximum
forward current is greater or equal to the maximum
peak current in the inductor, and the maximum reverse
voltage is greater or equal to the output voltage.
The Zetex FMMT617 is an ideal choice of transistor,
having a low saturation voltage. A data sheet for the
FMMT617 is available on Zetex web site or through
your local Zetex sales office. Outline information is
included in the characteristics section of this data
sheet.
Inductor selection has a significant impact on the
converter performance. For applications where
efficiency is critical, an inductor with a series
resistance of 500m Ω or less should be used.
Peak current definition
The peak current rating is a design parameter whose
value is dependent upon the overall application. For
the high brightness reference designs, a peak current
of 190mA was chosen to ensure that the converter
could provide the required output power to the LED.
The Zetex ZHCS1000 meets these needs. Datasheets
for the ZHCS Series are available on Zetex web site or
through your local Zetex sales office. Outline
information is included in the characteristics section of
this data sheet.
In general, the I PK value must be chosen to ensure that
the switching transistor, Q1, is in full saturation with
maximum output power conditions, assuming
worse-case input voltage and transistor gain under all
operating temperature extremes.
For the maximum brightness solution a pulsed current
is supplied to the LED therefore a Schottky rectifier
diode is not required.
Once I PK is decided the value of R SENSE can be
determined by:
Inductor selection
The inductor value must be chosen to satisfy
R SENSE =
V ISENSE
I PK
performance, cost and size requirements of the overall
solution. For the reference designs we recommend an
where V ISENSE =19mV
inductor value of 100uH with a core saturation current
rating greater than the converter peak current value
and low series resistance.
ISSUE 4 - SEPTEMBER 2007
8
发布紧急采购，3分钟左右您将得到回复。
相关PDF资料
ZXSC380FHTA
IC LED DRVR WHITE BCKLGT SOT23-3
ZXSC400E6TA
IC LED DRVR WHITE BCKLGT SOT23-6
0-1005447-1
SENSOR PIEZO FILM VIBRA MASS
0035.1272
HOLDER LED SRL 5MM YELLOW
0035.4208
LED REFLECT INTERNAL 24V 3MM GRN
0035.7023
HOLDER LED PBL 3MM GREEN
0035.9617
HOLDER WITHOUT LED 3MM 8PLACE
0035.9647.1111
HOLDER W/LED 3MM RED RT ANG SGL
相关代理商/技术参数
ZXSC300E5TA
制造商:Diodes Incorporated 功能描述:IC LED DRIVER SMD SOT-23-5 300
ZXSC300E5TC
功能描述:LED照明驱动器 White LED Drvr Cvrtr RoHS:否 制造商:STMicroelectronics 输入电压:11.5 V to 23 V 工作频率: 最大电源电流:1.7 mA 输出电流: 最大工作温度: 安装风格:SMD/SMT 封装 / 箱体:SO-16N
ZXSC310
制造商:ZETEX 制造商全称:ZETEX 功能描述:LED DRIVER SOLUTION FOR LCD BACKLIGHTING
ZXSC310_04
制造商:ZETEX 制造商全称:ZETEX 功能描述:LED DRIVER SOLUTION FOR LCD BACKLIGHTING
ZXSC310E5
制造商:Diodes Incorporated 功能描述:IC LED DRIVER BOOST CONVERTER 310 制造商:Diodes Incorporated 功能描述:IC, LED DRIVER BOOST CONVERTER, 310 制造商:Diodes Incorporated 功能描述:IC, LED DRIVER BOOST CONVERTER, 310; Topology:Boost; No. of Outputs:1; Output Current:3.5mA; Output Voltage:8V; Driver Case Style:SOT-23; Input Voltage Min:800mV; Input Voltage Max:8V; Switching Frequency:200kHz; Operating ;RoHS Compliant: Yes
ZXSC310E5
制造商:Diodes Incorporated 功能描述:IC LED DRIVER BOOST CONVERTER SMD
ZXSC310E5TA
功能描述:LED照明驱动器 LED Drvr w/shutdown RoHS:否 制造商:STMicroelectronics 输入电压:11.5 V to 23 V 工作频率: 最大电源电流:1.7 mA 输出电流: 最大工作温度: 安装风格:SMD/SMT 封装 / 箱体:SO-16N
ZXSC310E5TA-CUT TAPE
制造商:DIODES 功能描述:ZXSC310 Series 3.5 mA 200 kHz Surface Mount LED Driver Solution - SOT-23-5